Skip to main content

HA-MIC04

Hearit.AI VoiceRec​

MIC04

Device Information​

Firmware Update Methods​

We regularly release new firmware to optimize performance and add new features. You can update your device using one of the following methods:

Method 1: Online Firmware Update​

Before updating firmware, you need to connect your HA-MIC04 to a WiFi network.

WiFi Configuration​

Step 1: Connect to WiFi Configuration Portal​

  1. Visit https://hearit.ai/wifi/ in your web browser
  2. Enter your WiFi network name (SSID) and password
  3. Important: Make sure your WiFi network operates on the 2.4GHz frequency band
WiFi Configuration Portal

Step 2: Connect Your Device​

  1. Click "Start Configuration"
  2. When prompted, search for and connect to your MIC04 device
Device Connection

Step 3: Transfer WiFi Credentials​

The website will automatically transmit your WiFi credentials to your MIC04 device

Transferring WiFi Credentials

Step 4: WiFi Connection Confirmation​

Once WiFi credentials are successfully transmitted and the device connects to your network:

  • LED Status: ⚪ White solid light
  • Meaning: WiFi connection successful
  • Your device is now connected to the internet and ready for firmware updates

Firmware Upgrade Steps​

Regular firmware updates ensure your HA-MIC04 device operates with the latest features and optimizations.

Prerequisites​

  • Your MIC04 device must be connected to a 2.4GHz WiFi network
  • Ensure your device has at least 50% battery charge
  • Make sure the device is within good WiFi signal range

Update Procedure​

Step 1: Configure WiFi Connection

Before updating firmware, make sure your device is properly connected to WiFi by following the WiFi Configuration instructions above.

Step 2: Initiate Firmware Update

  1. Ensure your device is powered on and connected to WiFi
  2. Quickly press the Front Button 5 times in succession
  3. The device will automatically check for available updates

Step 3: Monitor Update Progress

The LED indicator provides real-time feedback on the update process:

LED StatusMeaningAction Required
Steady YellowChecking for updatesWait while the device connects to the update server
Flashing YellowUpdate in progressDo not turn off or reset the device during this process
Flashing RedWiFi issue or update failedCheck your WiFi connection and try again
Flashing WhiteNo updates availableYour device already has the latest firmware

Step 4: Update Completion

When the update process completes successfully:

  • The device will automatically restart
  • The LED will return to its normal state
  • Your device will be ready to use with the latest firmware improvements

Latest Firmware Features​

Version 1.5.0:

  • Internal Storage Recording: Record audio directly to device storage without requiring Bluetooth connection
  • Access recordings by connecting the device to a computer via USB cable

Method 2: Product Flashing (Windows)​

This method is suitable for advanced users or when the online update is not available.

Preparations Before Starting​

Required Items:

  • A computer running the Windows operating system (supports Windows 7/8/10/11)
  • Original USB data cable
  • Device to be flashed
  • Flashing program corresponding to the device (.exe file)

Notes:

  • Ensure the computer has sufficient battery power to avoid power failure during operation
  • Use the original USB data cable to ensure connection stability
  • Disable antivirus software and firewalls on the computer before flashing to prevent interference with program operation
  • Do not disconnect the USB connection or close the flashing program during the flashing process

Flashing Steps​

Step 1: Enter Update Mode

  1. Press the Front button 5 times quickly, then hold until the device enters firmware update mode
  2. The LED will display a special pattern to confirm entry into update mode
  3. Connect the HA-MIC04 to your computer via USB Type-C cable

Step 2: Launch the Flashing Program

  1. Locate the flashing .exe file corresponding to the device
  2. Double-click the file to launch the flashing program
  3. Wait for the program to load completely (the main program interface usually appears)

Step 3: Connect the Device

  1. Ensure the USB connection is secure between your computer and the device
  2. The flashing program should automatically detect the device
  3. Confirm the connection status displayed on the program interface flashing-mode

Step 4: Automatic Flashing Process

  1. The flashing program will automatically begin the firmware update
  2. The program interface will display the connection status and flashing progress
  3. Wait for the flashing to complete; do not perform any operations during this period Flashing-completed

Step 5: Manually Trigger Flashing (If Automatic Flashing Does Not Start)

  1. If the program does not start flashing automatically, check whether the device entered update mode correctly
  2. Find and click the "Update Mode" or "Start Flashing" button in the flashing program interface
  3. Observe the progress bar displayed on the program interface and wait for the flashing to complete

Completion and Verification​

  • After successful flashing, the program will display a prompt message such as "Flashing Completed" or "Success"
  • The device will restart automatically or prompt that it can be disconnected
  • Disconnect the USB connection and check if the device can start normally
  • If the device starts normally, the flashing is successful

Technical Support​

For assistance with firmware updates: